SERIAL BLUETOOTH 4.0 BLE MODULE

د.ا 13.00

  •  TTL data transparent transfer between a host Bluetooth device(IOS or Android 4.3).
  • Ultra-low standby power consumption 400uA ~ 800uA
  • Default Baud Rate: 960081n.
  • Coverage up to 60 meters
  • Built in antenna
  • Power input: 3.6V-6VDC(Can not higher than 6V)
Category: Tags: , ,

Description

Description:

This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with your iPhone/iPADAndroid 4.3 above devices. It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baudrate.

PIN define:

  • STATE -You can connect a external LED to indicate the bluetooth state. It same as the state LED on the module.
  • RXD -Receive data
  • TXD -Send data
  • GND -Power ground
  • VCC -DC power in (3.3V-6VDC)
  • KEY -Turn on/off this module by this pin.(1- OFF0/Open- ON)

Documents: